P=NONE, MD=SDRAM, B=DISABLED
Selects the configuration information for dynamic memory chip select 0.
| RESERVED | Reserved, user software should not write ones to reserved bits. The value read from a reserved bit is not defined. |
| MD | Memory device. 0 (SDRAM): SDRAM (POR reset value). 1 (RESERVED): Reserved. 2 (RESERVED): Reserved. 3 (RESERVED): Reserved. |
| RESERVED | Reserved, user software should not write ones to reserved bits. The value read from a reserved bit is not defined. |
| AM0 | Address mapping. See Table 382. 000000 = reset value.[1] |
| RESERVED | Reserved, user software should not write ones to reserved bits. The value read from a reserved bit is not defined. |
| AM1 | Address mapping See Table 382. 0 = reset value. |
| RESERVED | Reserved, user software should not write ones to reserved bits. The value read from a reserved bit is not defined. |
| B | Buffer enable. 0 (DISABLED): Disabled. Buffer disabled for accesses to this chip select (POR reset value). 1 (ENABLED): Enabled. Buffer enabled for accesses to this chip select. After configuration of the dynamic memory, the buffer must be enabled for normal operation. [2] |
| P | Write protect. 0 (NONE): None. Writes not protected (POR reset value). 1 (PROTECTED): Protected. Writes protected. |
| RESERVED | Reserved, user software should not write ones to reserved bits. The value read from a reserved bit is not defined. |